Become a user of our services and ensure the quality and professionalism that we can provide
SERVICE AND MAINTENANCE
All procedures in the service and maintenance are provided by the manufacturer of machines and are consistent with ISO 9001:2001. Any service or repair we approach in detail and carefully. Our customer receives after each disassembly a disassembly certified paper and after each service receives the record of papers describing the type of machine works, a list of installed spare parts, notes in the course of handling, the proposals for the next service, tips, etc..
piston, rotary and spiral (Screw) compressors (division by construction) that the working fluid using air, liquid-petroleum gas LPG, hydrogen, ammonia, etc.;
piston, centrifugal, vane, etc.., that the working fluid used water, liquid-petroleum gas LPG, oil, fuel, pesticides, sewage, etc..
For those who want to know more:
Piston compressors are machines for producing compressed air at which the compression is done by means of the cylinder piston. Piston can compress air while moving in one or both directions. In the first case is defined as a single-stage, while in the latter case is called two-step. Piston compressors can have one or more cylinders. They may be moving or stationary.
The principle of rotary compressor is the fact that by using blades, which act as valves, turn the rotor compresses the air. The rotor in the cylinder in which the air compression is, in relation to him eccentric set. Rotary compressors provide several advantages compared to piston compressors, such as compactness, lower weight, uniform flow, different outputs, safe operation and long life.
Spiral compressor working elements are two helical rotors, which affect each other. In their workspace is the compression of air. Drive "male rotor has four blades and rotates 50% faster than the" female "rotors with six grooves. As the air enter and pass through the compressor, it is compressed in the space between the grooves. Open for input and output of air at the ends of the rotor is automatically opened and closed during compressor operation.
These compressors are manufactured in a relatively wide range of capacities, with single or multi-level compression and with rotors that operate without lubrication or lubrication oil.
Compared with other types of compressors, offering several advantages such as.:
• silent operation that satisfies the legal limits for noise, with or without loss of output
• small number of moving parts, with minimal mechanical wear and minor maintenance requirements
• automatic control that regulates the speed so as to get the required output pressure
• with slight or no pulsation in the flow of air and therefore reduced vibration
Steam turbine belongs to the heat engines, such as internal combustion engines and the steam engine, which converts thermal energy into mechanical work. On the other hand, the steam turbine is one of the group turboengines together with pumps, fans, hydraulic and gas turbines and turbochargers.
02.06.15. Single-stage centrifugal pumps for Diesel and Petrol Monostage centrifugal pumps with open vortex impeller
05.04.12. Pumps and compressors for LPG We can perform you a services of pumps a ...
Branimira Ćosića 14
21000 Novi Sad
Republic of Serbia